CABOT VENEER BOARD

• High Quality: Cabot Veneer Board is manufactured to meet or exceed the requirements of ASTM C 1396 and CAN/CSA A82.271. This means you can trust its quality and performance.
• Natural Gypsum: Unlike some other products, Cabot Veneer Board is made from natural gypsum sourced from local quarries and gypsum recycling facilities. It is not made with FGD (synthetic gypsum). This natural composition ensures better durability and environmental friendliness.
• Versatility: Cabot Veneer Board is suitable for various applications. Whether you need it for interior walls, ceilings, or other construction projects, it provides a reliable solution.
• Fire Resistance: If fire safety is a concern, Cabot Veneer Board meets the requirements for fire-rated gypsum boards. It’s essential for maintaining safety standards in buildings.
• EIFS Applications: Cabot Sheathing Board, another product from Cabot Gypsum, can be used in EIFS (Exterior Insulation and Finish Systems) applications when specified by an EIFS manufacturer. This versatility extends to the overall construction process.

In summary, Cabot Veneer Board combines quality, natural materials, and versatility, making it an excellent choice for your construction needs

 Cabot Gypsum Veneer Board has a core of noncombustible; dimensionally stable gypsum rock sandwiched between a face layer of 100% recycled blue/gray colored paper and a brown back paper. The face paper is designed to absorb moisture and allow plaster products to adhere to the surface yet protect the core/paper bond. The face paper is formed along each long edge, and wrapped and sealed to the paper on the backside. This produces a strong yet flexible panel in convenient width and lengths. Even though Cabot Gypsum Veneer Board have some inherent fire resistant characteristics it is not intended for use in assemblies requiring a fire rating. 

Cabot Gypsum Veneer Board can be used for most walls, partitions and ceilings in both new commercial and residential construction and remodelling work. Cabot Gypsum Veneer Board is an excellent barrier to the transmission of noise and thermal energies but must be installed in the proper thickness and methods that has been tested to achieve the desired rating as per Standard Specification for Application and Finishing of Gypsum Board, ASTM C 840, non rated construction.

 Cabot Gypsum Veneer Board is manufactured to meet or exceed the requirements of ASTM C 1396 and CAN/CSA A82.27.  

• Exposure to excessive or continuous moisture and extreme temperature 52oC (125oF) should be avoided. 
• Store indoors and off ground surface. 
• Boards should be stacked flat with care taken to prevent sagging or damage to edges, ends and surfaces. 
• Storing board lengthwise leaning against framing is not recommended. 
• This board is nonstructural and should not be used as a nailing base to support heavy wall-mounted objects. 
• Cabot Gypsum Veneer Board should only be used with veneer plaster products. 

 Surface Burning Characteristics: Flame Spread Rating of 5, Smoke Developed 0 per ASTM E 84 or CAN/ULC - S102. 

Thickness: 1/2" (12.7 mm)

Width: 48" (1220 mm)

Lengths: 8' (2440 mm) to 12' (3660 mm)

Edges: Tapered, Square

Packaging: Two pieces per bundle, face-to-face and end taped.

 Cabot Gypsum Veneer Board can be applied to wood framing with drywall nails or Type W screws and with special adhesives in combination with supplemental fasteners. The Veneer Board may also be applied to light gauge metal framing with self-tapping Type S screws. The application must conform to ASTM C 844, Application of Gypsum Base to Receive Gypsum Veneer Plaster. The board can be cut to size using the standard score and snap method to create tight fitting joints. In cold weather or during joint finishing, temperatures within the range of 50o to 95oF (10o to 35oC) and with sufficient ventilation to carry off excess moisture. 

 Cabot Gypsum Veneer Board comes from the factory ready-to-use, the plaster products are by others. Both the veneer plaster manufacturer's recommendations and those of ASTM C 843, Application of Gypsum Veneer Plaster must be adhered to.