Protec M+M+AR Gypsum Panels

• Abrasion and Indentation Resistance: Protec M+M+AR panels are specifically designed for high-traffic areas where durability matters. Whether it’s a school, hospital, or public building, these panels can withstand the wear and tear associated with heavy use.
• Mold and Moisture Resistance: The proprietary gypsum core is treated with the “Protec” mold/moisture inhibitor. Additionally, both the 100% recycled blue face layer and the gold back paper receive the same treatment. This makes Protec M+M+AR panels resistant to mold and moisture, ensuring longevity and a healthier indoor environment.
• Flexible Installation: The face paper is meticulously formed along each edge, wrapped around, and sealed to the paper on the back side. This results in a strong yet flexible panel that meets most commercial and residential construction requirements for wall and ceiling substrates.
• Fire Resistance: Protec M+M+AR Type X Gypsum Board is UL and ULC classified. It has undergone fire resistance tests according to ASTM E119 and CAN/ULC-S102. The non-combustible core ensures safety in fire-tested assemblies.
• Versatility: These panels work well in both commercial and residential settings. Whether you’re constructing partitions, walls, or ceilings, Protec M+M+AR panels offer a reliable solution.
• Mold-Proof Rating: Protec M+M+AR Gypsum Board resists mold growth, achieving a score of 0 in ASTM G21 and 10 (the highest rating) in ASTM D3273 tests.

Protec M+M+AR Type X Gypsum Panels are designed for interior high traffic areas where abrasion, indentation resistance and mold/water resistance are primary considerations. 

Protec M+M+AR Gypsum Panels are comprised of a proprietary high density. Type X gypsum core enhanced with "Protec" mold/moisture treatment. In addition, the 100% recycled blue face layer and the gold back paper are also treated with the same "Protec" inhibitor. 

The face paper is formed along each edge, wrapped around and sealed to the paper on the back side. This produces a strong yet flexible panel in convenient width and length to meet most commercial/residential construction requirements for wall and ceiling substrates.

Protec M+M+AR Gypsum board is manufactured to meet or exceed the requirements of: ASTM C1396 Section 7, and CAN/CSA A82.27, Gypsum Board.

Installation according to CAN/CSA A82.31, Gypsum Board Application, and Installation Standards, ASTM C840, and specific UL/ULC requirements. 

5/8" (16 mm) Protec M+M+AR Type X is UL and ULC classified. 

Fire resistance tests in accordance with ASTM E119 and CAN/ULC-S102. 

Non-combustible core when tested in accordance to ASTM E136 or CAN/ULC S114.

Mold Resistance: ASTM D3273 scored 10, and per ASTM G21 scored 0.

Water Absorption: ASTM C473 scored <5%

• Exposure to excessive or continuous moisture and extreme temperature 52o C (125o F) should be avoided during all phases and life cycle of the board. 
• Store indoors and off ground surface. 
• Boards should be stacked flat with care taken to prevent sagging or damage to edges, ends and surfaces. 
• Storing board lengthwise leaning against framing is not recommended. 
• This board is nonstructural and should not be used as a nailing base to support heavy wall-mounted objects. 
• Maximum insulation load: 1.3 pdf with 24" o.c. framing and 2.2 pdf with 16" o.c. framing. 
• Maximum framing spacing on walls and ceilings is 24" o.c. see chart on specification sheet. 
• Abuse resistance performance on metal framing requires a minimum of 20 gauge metal and 16" o.c. to be the maximum framing spacing. 
• No material may be classified as mold-proof. Prolonged exposure to moisture can result in the growth of mold on any surface. The use of good design, proper handling, and construction practices is the best way to avoid issues. 
• Not suitable for use in high moisture areas such as tube and shower surrounds, gang showers and other areas subject to direct water exposure. 

Mold Resistance: ASTM D3273 scored 10, and per ASTM G21 scored 0.

Water Absorption: ASTM C473 scored <5%

Surface Burning Characteristics: Flame Spread Rating of 15, Smoke Developed 0 per ASTM E84 or CAN/ULC-S102. 

Thickness: 5/8" (15.9 mm)

Width: 48" (1220 mm)

Lengths: *8' (2440 mm) to 12' (3660 mm)

Edges: Tapered

Packaging: Two pieces per bundle, face-to-face and end taped. 

*Special lengths may be available, consult nearest Cabot Gypsum sales office.

Protec M+M+AR Type X should be installed according to ASTM E840. For partitions requiring a fire rating fastener spacing, board orientation and other details must be according to the applicable published details within the UL/ULC directories. 

 Protec M+M+AR Gypsum Board is designed to accept most types of paints, texture and wall covering materials. The surface should be primed and sealed with a full bodied quality latex primer before applying a decorative material. This will equalize the suction variation between the joint compounds and the paper surface. If glossy paints are used in areas such as kitchens or bathrooms, a thin skim coat of compound over the entire surface is recommended to reduce highlighting or joint photographing. This method is also recommended in areas of severe side lighting of either natural or artificial light sources. Joint treatment must be thoroughly dry before proceeding with primer-sealer application and final decoration.